Trek 152-1 Resistance Meter Bedienungsanleitung PDF herunterladen (Seite 2)

Probes/Accessories (cont)

Performance

Features

Test Probes/Accessories

Model 152P-2P Two Point

Measurement Range

3 13

Resistance Probe

10 to 10

Performs measurements on surface

areas too small to be measured

with conventional probes.

Model 152P-CR-1 Surface/Volume

Concentric Ring Probe*

Measures surface and volume

resistance of materials as per

IEC or ESDA standards. A three (3)

position switch on the probe selects

either SURFACE resistance or

VOLUME resistance measurements

with either a GUARDED or

UNGUARDED outer electrode. Uses

an exclusive built-in pre-amplifier

design.

IEC 61340-2-3 Electrostatics Part

Resistance Probes, 3mm x 25.4mm

2 and 3

Set of two miniature probes

STM2.1Garments.

[Model 152AP-3mm x 25.4mm

S4.1 Work surfaces -

Resistance Probe (pair)] can be

resistive

handheld and randomly positioned.

characterization.

Test Plate Set

S7.1 Flooring materials.

(consists of two separate plates)

STM9.1Footwear resistive

The use of these plates is described

characteristics.

LCD Display

in the ESD STM11.12 (IEC 61340-2-

STM11.11 Surface resistance

Three digits plus two digit exponent

measurements of static

3) standard.

(scientific notation).

dissipative planar

Conductive Plate

materials.

(5" x 5"/127 mm x 127 mm) A

Low Battery Indicator

STM11.12 Measurements for

stainless steel conductive plate

LCD message for low battery.

volume resistance

(with a mini banana plug

Test Voltage Range Indicator

(IEC 61340-2-3).

connector).

Indicates the test voltage selected,

STM12.1 Seating - resistive

Insulative Plate

either 10 V or 100 V.

measurements.

(5.4" x 5.4"/ 137 mm x 137 mm)

STM11.13 Two-point resistance

Acts as an insulative surface.

Automatic Shutoff

measurement.

Walking Test Adapter Kit

If the unit is left idle for longer than

STM97.1 Floor materials /

The Walking Test Adapter allows

10 minutes, the unit automatically

footwear - resistance

analysis of resistance levels on the

turns off.

measurements in

human body [STM 97.1].

combination with active

user.

Model 152BP-5P Test Probes

2.27 kg (5 lb) (set of two probes)

Available for performing resistance

measurements including

ANSI/ESDSTM4.1 standards (point-

to-point or resistance to ground

measurement)

Battery Operation

Two (2) 9 Volt batteries (NEDA 1604

Alkaline, or equivalent) provide

6 hours of power for portable

Measurement Accuracy (of reading)

operation.

at 25 °C ±10 °C and 20% to 70% RH:

AC Line Operation

Point-to-point probes [152BP-5P]

The use of a AC battery eliminator

3 12

10 to 10 W range, ±5%,

allows for AC line operation. The

eliminator output connector is a

10 W range, ±8%.

female type 2.1 mm DC power plug.

Concentric Ring Probe [152P-CR-1]

ANSI/ESD Association Standards

and Two-point resistance probe

The Model 152-1 conforms to the

[152P-2P]

following IEC and ANSI/ESD

3 11

10 to 10 W range, ±5 %,

Association Standards for

12 13

measuring surface resistance and

10 to 10 W range, ±10 %.

surface resistivity:

Probe Electrode Test Voltage

User selectable: 10 V or 100 V, ±2%.

Test Current Limit

Limited to less than 13 mA in the

10 V range and less than 1.7 mA in

the 100 V range.

Instrument Dimensions

180 mm H x 100 mm W x 44 mm D

(7² H x 4² W x 1.75² D).

Instrument Weight

Approximately 0.5 kg (1 lb) with

batteries.

*The Model 152-CR-1 will operate with

the previous Model 152 resistivity meter

in “surface” mode, just as the Model

152-CR probe did. The 152-CR will

operate with the Model 152-1

Resistance Meter with the

measurement being in “ohms,” not

“ohms/sq.”

General

Model 152-1 Resistance Meter (cont.)

Supplied Accessories · Operator's Manual [23426] · Ground Cord [N9044]

Optional Accessories · Battery Eliminator/Charger (115 V AC) [L5111] · Test Plate Set [17530]

· Universal AC Adapter Kit (90 to 265 V AC) [1K010] · Carrying Case [43378]

· Test Probes purchased separately · Walking Adapter Kit [1K039]

TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK

(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Trek 152-1 Resistance Meter Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Trek 152-1 Resistance Meter